MX-5 Weld-In Roll Cage Build

This MX-5 came to us requiring a full weld-in roll cage for aggressive track use. The owner hopes to compete in the future, requiring the highest level of protection that meets Motorsport UK regulations.
Project Overview
Unlike bolt-in roll bars, a weld-in cage becomes a structural part of the vehicle. This provides significantly greater protection in the event of a roll-over, as the forces are distributed throughout the chassis rather than concentrated at mounting points. This adds the benefit of allowing the suspension to do all the work, instead of the chassis flexing.
Build Specifications
- Material: 44.45mm x 2.64mm CDS tube throughout
- Design: Multi-point cage with door bars
- Compliance: Built to current Motorsport UK K regulations
The Build Process
Starting with a stripped interior, we first created all the mounting points with proper reinforcement plates welded to the chassis. Each tube was then hand-formed, notched, and fitted before final welding. All welds are fully penetrating and inspected to ensure structural integrity.
Final Result
The completed cage provides competition-level protection while maintaining the ability to use the car on track days. With integrated harness mounting points and a properly braced structure, this MX-5 is now ready for some serious abuse.

